Retro Shop Favorites

Instagram HTML Online Editor Sample

  Home > By Vehicle > 13+ Ram >

2013+ Ram LED Switchback Boards
2013+ Ram LED Switchback Boards

Alternative Views:

Our Price: $160.00

Availability:: Usually Ships in 1 to 2 Days
Product Code: 13.SB

Switchback Type*:


PLEASE NOTE - professional installation of these boards is HIGHLY recommended! This is not a plug n play product, you will need to fully disassemble your lights, remove the factory LED boards and solder the leads from the new boards to the headlight's internal wiring. Professional installation services of these boards are available as well!

Our replacement LED panels are a direct replacement for the factory ones, but have double the number of LEDs, both white and amber. The high-power white LEDs turn on as your parking lights, for a much more modern look than the factory amber. Then, when you hit your turn signal, the white shuts off, and they light up in bright amber to indicate signaling. You can also connect them to a DRL relay (not included) to run them as a bright white DRL, which will then dim when you turn your headlights on, just like a quality factory DRL system.

Your order includes four total panels, to replace the OEM panels on both the driver and passenger side. You also receive the required high-power inductive constant-current drivers. Included in the driver is a digital latching circuit to control the amber and white switchback function, as well as an adjustable PWM dimmer, to control the brightness of the white when headlights are turned on.

Made in USA, these replacement panels utilize high-power 3030 SMD chips, which are rated at 30W of total power per side. The amber chips are a custom-manufactured downcoverted 1800K LED for superior brightness compared to standard amber chips, ensuring extremely high brightness, even during the day.

For OEM-grade reliability, the LEDs are protected by a thermal management system, which is integrated into the panel and driver. If the temperature of the LEDs becomes too high for any reason, the output of the LEDs will decrease, to ensure long life in even the harshest environments. And of course, the advanced constant-current driver ensures that there will be no damage to the LEDs long-term from the harsh electrical system of the vehicle.

Currently, leads are included which must be connected to turn signal power, parking light power, and DRL power (if available). You will need to solder the leads to the existing wiring inside the headlight, and as such - professional installation is strongly recommended, as the factory headlights must be opened in order to replace the LED panels. Wiring notes:

OEM wiring - pin # - function - color of wire
2 - parking - green
13 - ground - black
4 - DRL - orange
12 - turns - gray
Replacement switchback boards:
White - Parking lights (solder to green)
Black - Ground (solder to black)
Red - DRL (if equipped, solder to orange)
Yellow - Turn signals (solder to gray)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Another amazing Diode Dynamics product!!! July 30, 2017
Reviewer: OnSale from Newtown, PA  
I got these LED Switchback Boards for my headlight build and they were so easy to install it was crazy. DD has a step by step install guide on their YouTube and it couldn't have been easier. I just tested the installed boards out and they are bright and look amazing. The quality of this product is top notch and looks fricken sweet!

Was this review helpful to you?