Links

Retro Shop Favorites

Instagram HTML Online Editor Sample





Home > Projectors / LEDs
Sort By:
Page of 2
CanBus Adapter
Our Price: $35.00

The Morimoto Standalone wire harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to "bulb out" warning lamps and flickering caused by "can-bus" systems. These can be used on many different types of Mopars, we only stock the "9006" setup - which is compatible with your 09+ Ram with the Quad lights (H11 / 9005 bulbs), or any '13-14 Ram (these will NOT work on the '15+ Rams!) These can also be used on Chargers, Challengers, Darts, etc - if there are any questions, please contact us before ordering!


Each harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed.


The Moto Standalones also feature Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicles factory headlight circuit.


With just the fewest connections to make compared to our other harnesses; even your mom could set this thing up on a car it's that easy.


Sold as a pair, which is considered a substitution for a normal relay harness. (not typically in-addition to).

3157 LED Switchbacks
Our Price: $70.00

Included:
2 3157 4W LED Switchback bulbs
2 50w6ohm resistors
High Powered Reverse Bulbs
Our Price: $90.00

Included:
2 3157 4W LED Switchback bulbs
2 50w6ohm resistors
XML2 LED Bulbs
Our Price: $120.00

FUNCTION

Fog Light LED bulbs are an excellent way to improve the appearance of your vehicle. From the factory, most vehicles come with halogen bulbs, which project in a yellowish light. By replacing them with LEDs, you can create a modern appearance with the cool white light of LEDs.

The installation is 100% plug-and-play, just replace your factory bulb!


BULB DESIGN

XML2: Two opposing genuine CREE XM-L2 chips, driven at high power by self-contained regulator unit, in an attractive cast-aluminum housing. Fully waterproof, non-polar, modular design.

Included in your order is TWO BULBS.


COLOR

These LEDs illuminate in a crisp, bright, cool white hue. The XML2 is also available in natural white, pure white, and yellow.


BRIGHTNESS

XML2: 1410 lumens. Much brighter than factory. These are bright!

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures.

Morimoto Mini v7 H1 Projectors
Our Price: $135.00

By far, the best projector for your buck!  The Morimoto Mini projectors accept a H1 HID bulb, and are easy to install!  

FREE shipping in the lower 48!!!
2013+ Ram LED Switchback Boards
Our Price: $160.00

PLEASE NOTE - professional installation of these boards is HIGHLY recommended! This is not a plug n play product, you will need to fully disassemble your lights, remove the factory LED boards and solder the leads from the new boards to the headlight's internal wiring. Professional installation services of these boards are available as well!

Our replacement LED panels are a direct replacement for the factory ones, but have double the number of LEDs, both white and amber. The high-power white LEDs turn on as your parking lights, for a much more modern look than the factory amber. Then, when you hit your turn signal, the white shuts off, and they light up in bright amber to indicate signaling. You can also connect them to a DRL relay (not included) to run them as a bright white DRL, which will then dim when you turn your headlights on, just like a quality factory DRL system.

Your order includes four total panels, to replace the OEM panels on both the driver and passenger side. You also receive the required high-power inductive constant-current drivers. Included in the driver is a digital latching circuit to control the amber and white switchback function, as well as an adjustable PWM dimmer, to control the brightness of the white when headlights are turned on.

Made in USA, these replacement panels utilize high-power 3030 SMD chips, which are rated at 30W of total power per side. The amber chips are a custom-manufactured downcoverted 1800K LED for superior brightness compared to standard amber chips, ensuring extremely high brightness, even during the day.

For OEM-grade reliability, the LEDs are protected by a thermal management system, which is integrated into the panel and driver. If the temperature of the LEDs becomes too high for any reason, the output of the LEDs will decrease, to ensure long life in even the harshest environments. And of course, the advanced constant-current driver ensures that there will be no damage to the LEDs long-term from the harsh electrical system of the vehicle.

Currently, leads are included which must be connected to turn signal power, parking light power, and DRL power (if available). You will need to solder the leads to the existing wiring inside the headlight, and as such - professional installation is strongly recommended, as the factory headlights must be opened in order to replace the LED panels. Wiring notes:

OEM wiring - pin # - function - color of wire
2 - parking - green
13 - ground - black
4 - DRL - orange
12 - turns - gray
Replacement switchback boards:
White - Parking lights (solder to green)
Black - Ground (solder to black)
Red - DRL (if equipped, solder to orange)
Yellow - Turn signals (solder to gray)
2013+ Ram Projector Halo / C bars
Our Price: $160.00

Ram LED Fogs
Our Price: $200.00

Designed: from scratch specifically for the 2009-2012 Ram 1500, 2010+ Ram 2500, and 2010+ Ram 3500, these not only increase the appearance of the front of your Ram, but man they'll shred some apexes with beautiful white light.



Powered: by three Philips Luxeon-T 5000K LED's that produce around 1200 raw lumens per side. The projector based optics inside concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. They are SAE, DOT, and ECE approved.



Well-Built: Their durable polycarbonate lens should resist the test of time, keeping the housings looking new. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. To fit in place of the stock fog light, a UV-stable ABS plastic bezel rounds things out



Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory power outlets for the stock fog lights and each fog light includes all necessary connectors, rubber seals, and pigtails for a plug n play install. Please note, 15+ Rams will require the resistor / splitter pack to function correctly. This is still a full pnp setup!

15+ F150 / 17+ SuperDuty LED Fogs
Our Price: $200.00

NO SUBSTITUTES: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.

COMPATIBLE: With many modern applications from Ford, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.

PLUG N PLAY: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.

POWERED: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.

WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem...no joke!

WORD ON THE STREET: Don't just take our word for it, check out these Install & Review videos that previous customers have put together! Everybody loves a good YouTube demo, so check it out HERE!, HERE!, HERE!, and HERE!

TRUSTED: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that TRS carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes.

PRE-ORDER - Ram LED Fogs (13+ 1500 Model)
Our Price: $200.00

PRE ORDER - ESTIMATED SHIP TIME DEC 2017!!

Designed:
from scratch specifically for the 2013+ Ram 1500, these not only increase the appearance of the front of your Ram, but man they'll shred some apexes with beautiful white light.



Powered: by three Philips Luxeon-T 5000K LED's that produce around 1200 raw lumens per side. The projector based optics inside concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. They are SAE, DOT, and ECE approved.



Well-Built: Their durable polycarbonate lens should resist the test of time, keeping the housings looking new. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. To fit in place of the stock fog light, a UV-stable ABS plastic bezel rounds things out



Plug n Play: Wiring is easy too! The XB LED Fogs are designed to work without any special wiring. They will plug into the factory power outlets for the stock fog lights and each fog light includes all necessary connectors, rubber seals, and pigtails for a plug n play install. Please note, 15+ Rams will require the resistor / splitter pack to function correctly. This is still a full pnp setup!