Links

Retro Shop Favorites

Instagram HTML Online Editor Sample





Home > By Vehicle > Universal Fit
Sort By:
Page of 1
CanBus Adapter
Our Price: $35.00

The Morimoto Standalone wire harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to "bulb out" warning lamps and flickering caused by "can-bus" systems. These can be used on many different types of Mopars, we only stock the "9006" setup - which is compatible with your 09+ Ram with the Quad lights (H11 / 9005 bulbs), or any '13-14 Ram (these will NOT work on the '15+ Rams!) These can also be used on Chargers, Challengers, Darts, etc - if there are any questions, please contact us before ordering!


Each harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed.


The Moto Standalones also feature Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicles factory headlight circuit.


With just the fewest connections to make compared to our other harnesses; even your mom could set this thing up on a car it's that easy.


Sold as a pair, which is considered a substitution for a normal relay harness. (not typically in-addition to).

HID Bulbs
Our Price: $40.00

With their unsurpassed standards of quality, the Morimoto HID bulbs are a perfect way to replace or upgrade the cheap-o burners that come standard in most HID kits. Industry standard AMP inputs are compatible with 99% of HID ballasts out there. Features abound!

Kelvin & Luminosity: High quality Praxair (US) halide salts in the capsule of the 3Five bulbs ensure their color temperatures are as accurate as can be, while producing the maximum amount of lumens possible for each particular Kelvin rating. (3K/4.3K/5K/6K)

UV Output: Quartz glass minimizes the bulbs emission of ultraviolet light, which is harmful for the reflective surfaces inside your headlights. Often overlooked, but very important!

Precise Alignment: A ceramic sleeve surrounds the base of the glass capsule keeping things properly lined up. The resulting uniform distribution of light and well-defined beam limits will certainly stand out in comparison. For best results, we highly recommended use in projector based headlights.

Integrated rubber housing caps allow for a clean installation and weather-proof connection with externally mounted ballasts or relay harnesses.

Priced almost as much as a full eBay HID kit, we understand these are pricey. But, you do pay for what you get here. Better quality, better performance, and backed by a solid company.
3157 LED Switchbacks
Our Price: $70.00

Included:
2 3157 4W LED Switchback bulbs
2 50w6ohm resistors
High Powered Reverse Bulbs
Our Price: $90.00

Included:
2 3157 4W LED Switchback bulbs
2 50w6ohm resistors
Gift Certificate
Gift Certificate
Our Price: $100.00

Give the perfect gift. Gift Certificates ensure that your special person gets the perfect gift.
XB35 Ballasts
Our Price: $100.00

Trusted: With distribution exceeding 150,000 units over the last four years; more enthusiasts chose Morimoto over any other aftermarket ballast. Easily filling the shoes of the 3Five units that they replace, the brand new XB35 ballasts excel in every way.



Inspired: Packaged into a more retrofit-friendly design, The new XB's feature countless elements derived from the most popular OEM benchmarks. As good as they are; even arrogant retrofitters may start second-guessing those bulky, power hungry, exposed-to-the-elements, OE ballasts.



Protected: Their die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output.



Compact: Slim 17mm body will mount almost anywhere with their extremely functional and attractive eight-position mounting brackets.



Versatile: If you're like many of us retrofitters: the setup is always changing and now your ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.



Fast, Friendly and Efficient: Power hungry ballasts never work well with tricky CanBus systems, but the new XB35 ballast consume < 5A on ignition without compromising their reasonably quick warm up speed. That's much less than Denso, Mitsubishi, FastBright, and the old Morimoto too, which makes their ability to reach full intensity a more efficient process.



Modern Like all modern OEM D1 and D2 ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.



Reliable and Smart: The XB35 ballasts are designed to last for 2500 hours and there's not much that will stand in their way. The Matured DSP 2.0 software recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct.



Functional Works of Art: Designed by Artur Saakayan in California, the Morimoto XB35 Ballasts feature gloss piano black paint. Laser etched graphics. Stainless Steel hardware. Color coordinated mounting bracket and TechFlex braided insulation.

Hylux Canbus Ballasts
Our Price: $100.00

RIVALED: A long standing debate in the automotive aftermarket...Morimoto, or Hylux ballasts? Often regarded as the "other" great in the HID lighting industry; Hylux has been building reputable parts for about as long as we can remember - you just couldn't buy them from TRS, until now!

STANDARDS: The Hylux 2A88 EU-Spec Canbus HID ballasts produce an industry-standard 35w of power which typically provides around 3200 lumens on a quality 4300K Bulb. They will accept a 9-16V range for input and will power all HID bulbs with industry-standard AMP connectors.

CONVENIENT: They are compact and can fit most anywhere under the hood. No need to worry about moisture intrusion, as their shell is completely water resistant and the circuitry inside is protected by potting.

POWERFUL:Their powerful igniters are also capable of quick re-strikes without fail. Well designed circuitry and igniter setup results in a relatively fast warm up time for the HID bulbs when powered by a Hylux ballast, but without requiring much power.

CANBUS CAPABLE: The 2A88 has an integrated error canceler on the input line, making them compatible with most European vehicles without any extra gear required to cancel "lamp out" errors.

BACKED: By a full Three-Year warranty from the manufacturer, you know they're putting their money where their mouth is. If these ballasts fail under warranty, you're covered!

XB55 Ballasts
Our Price: $110.00

Trusted: With distribution exceeding 150,000 units over the last four years; more enthusiasts chose Morimoto over any other aftermarket ballast. Easily filling the shoes of the 3Five units that they replace, the brand new XB55 ballasts excel in every way.



Inspired: Packaged into a more retrofit-friendly design, The new XB's feature countless elements derived from the most popular OEM benchmarks. As good as they are; even arrogant retrofitters may start second-guessing those bulky, power hungry, exposed-to-the-elements, OE ballasts.



Protected: Their die-cast aluminum shell houses a 100% potted circuit board; eliminating any chance of moisture damage. The AMP SuperSeal three-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output.



Compact: Slim 17mm body will mount almost anywhere with their extremely functional and attractive eight-position mounting brackets.



Versatile: If you're like many of us retrofitters: the setup is always changing and now your ballasts can keep up! Since the igniter cord can be unplugged from the ballast, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced.



Fast, Friendly and Efficient: Power hungry ballasts never work well with tricky CanBus systems, but the new XB55 ballast consume < 5A on ignition without compromising their reasonably quick warm up speed. That's much less than Denso, Mitsubishi, FastBright, and the old Morimoto too, which makes their ability to reach full intensity a more efficient process.



Modern Like all modern OEM D1 and D2 ballasts: the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.



Reliable and Smart: The XB55 ballasts are designed to last for 2500 hours and there's not much that will stand in their way. The Matured DSP 2.0 software recognizes outside system faults such as a loose high voltage connection, and after one misfire will cut power rather than potentially self-destruct.



Functional Works of Art: Designed by Artur Saakayan in California, the Morimoto XB55 Ballasts feature gloss piano black paint. Laser etched graphics. Stainless Steel hardware. Color coordinated mounting bracket and TechFlex braided insulation.

Profile Powerhouse HID (35-50W)
Our Price: $150.00

WHY: It hasn't been done before? We have no idea...because the Powerhouse ballasts are genius. Put simply: they'll deliver a steady 35W of power to your HID bulbs until you kick the high beams on, at which point they'll boost output to a more powerful 50W. Safety in the form of reliability and longevity. Super in terms of your ability to see well when you need it most. Powerhouse in terms of their eventual popularity thanks to their ability to deliver the best of both worlds.

EASY: The best part? The Powerhouse ballast requires virtually no more wiring than a standard setup to hook up. By connecting a basic high beam splitter to the boost switch, the job is done. Other than that, you've got an integrated 9006 Male 12V power input, and the 3-pin output for the igniter. Like everything else in the Profile lineup, these are plug n play perfection.

OUTPUTS: Designed around modular outputs, you can utilize the same computer with either an AMP or D2S igniter. If you ever decide it's time to switch up your setup later on, the Powerhouse gives you the flexibility to do so without having to buy a whole new set of ballasts.

FORM & FUNCTION: Gotta give it up to the Profile design team, because these things look awesome. The ballast has these sweeping curves that flow from the edges of their inputs and morph into mounting points on the backside. The Profile crown adorns the face of the ballast, and the seafoam green screws that hold the shell together look sweet too. Very unique. Very compact. Very functional. Very good!

PRECISION: Like many of the other HID-based products in the Profile lineup, the Powerhouse ballasts inherits some DNA from their partners at Morimoto. Utilizing the latest 2017 version of the XB PCB with several enhancements and a layout change in order to make the variable output system work properly, these ballasts will run with the best in terms of reliability. They're also completely potted inside to ensure weather resistance in all seasons.